Long-Term Supported Versions

    Innovation Versions

      Image Management

      Creating an Image

      You can use the docker pull, docker build,** docker commit**, docker import, or docker load command to create an image. For details about how to use these commands, see 4.6.3 Image Management.

      Precautions

      1. Do not concurrently run the docker load and docker rmi commands. If both of the following conditions are met, concurrency problems may occur:

        • An image exists in the system.
        • The docker rmi and docker load operations are concurrently performed on an image.

        Therefore, avoid this scenario. (All concurrent operations between the image creation operations such as running the tag, build, and load, and rmi commands, may cause similar errors. Therefore, do not concurrently perform these operations with rmi.)

      2. If the system is powered off when docker operates an image, the image may be damaged. In this case, you need to manually restore the image.

        When the docker operates images (using the pull, load, rmi, build, combine, commit, or import commands), image data operations are asynchronous, and image metadata is synchronous. Therefore, if the system power is off when not all image data is updated to the disk, the image data may be inconsistent with the metadata. Users can view images (possibly none images), but cannot start containers, or the started containers are abnormal. In this case, run the docker rmi command to delete the image and perform the previous operations again. The system can be recovered.

      3. Do not store a large number of images on nodes in the production environment. Delete unnecessary images in time.

        If the number of images is too large, the execution of commands such as docker image is slow. As a result, the execution of commands such as docker build or docker commit fails, and the memory may be stacked. In the production environment, delete unnecessary images and intermediate process images in time.

      4. When the --no-parent parameter is used to build images, if multiple build operations are performed at the same time and the FROM images in the Dockerfile are the same, residual images may exist. There are two cases:

        • If FROM images are incomplete, the images generated when images of FROM are running may remain. Names of the residual images are similar to base_v1.0.0-app_v2.0.0, or they are none images.
        • If the first several instructions in the Dockerfile are the same, none images may remain.

      None Image May Be Generated

      1. A none image is the top-level image without a tag. For example, the image ID of ubuntu has only one tag ubuntu. If the tag is not used but the image ID is still available, the image ID becomes a none image.
      2. An image is protected because the image data needs to be exported during image saving. However, if a deletion operation is performed, the image may be successfully untagged and the image ID may fail to be deleted (because the image is protected). As a result, the image becomes a none image.
      3. If the system is powered off when you run the docker pull command or the system is in panic, a none image may be generated. To ensure image integrity, you can run the docker rmi command to delete the image and then restart it.
      4. If you run the docker save command to save an image and specify the image ID as the image name, the loaded image does not have a tag and the image name is none.

      A Low Probability That Image Fails to Be Built If the Image Is Deleted When Being Built

      Currently, the image build process is protected by reference counting. After an image is built, reference counting of the image is increased by 1 (holdon operation). Once the holdon operation is successful, the image will not be deleted. However, there is a low probability that before the holdon operation is performed, the image can still be deleted, causing the image build failure.

      Viewing Images

      Run the following command to view the local image list:

      docker images
      

      Deleting Images

      Precautions

      Do not run the **docker rmi -f **XXX command to delete images. If you forcibly delete an image, the docker rmi command ignores errors during the process, which may cause residual metadata of containers or images. If you delete an image in common mode and an error occurs during the deletion process, the deletion fails and no metadata remains.

      Bug Catching

      Buggy Content

      Bug Description

      Submit As Issue

      It's a little complicated....

      I'd like to ask someone.

      PR

      Just a small problem.

      I can fix it online!

      Bug Type
      Specifications and Common Mistakes

      ● Misspellings or punctuation mistakes;

      ● Incorrect links, empty cells, or wrong formats;

      ● Chinese characters in English context;

      ● Minor inconsistencies between the UI and descriptions;

      ● Low writing fluency that does not affect understanding;

      ● Incorrect version numbers, including software package names and version numbers on the UI.

      Usability

      ● Incorrect or missing key steps;

      ● Missing prerequisites or precautions;

      ● Ambiguous figures, tables, or texts;

      ● Unclear logic, such as missing classifications, items, and steps.

      Correctness

      ● Technical principles, function descriptions, or specifications inconsistent with those of the software;

      ● Incorrect schematic or architecture diagrams;

      ● Incorrect commands or command parameters;

      ● Incorrect code;

      ● Commands inconsistent with the functions;

      ● Wrong screenshots.

      Risk Warnings

      ● Lack of risk warnings for operations that may damage the system or important data.

      Content Compliance

      ● Contents that may violate applicable laws and regulations or geo-cultural context-sensitive words and expressions;

      ● Copyright infringement.

      How satisfied are you with this document

      Not satisfied at all
      Very satisfied
      Submit
      Click to create an issue. An issue template will be automatically generated based on your feedback.
      Bug Catching
      编组 3备份